With the internet it is possible to view the many types of curtains, choose the appropriate style and colour to suit your home. To name a few types of curtains you are likely to find: curtain valance, cascade curtains, shirred curtains, café curtains and more. When you consider curtain types, also investigate the type of hanging style you require, for example you may want to choose a rod which has designs to fit, you may be interested in pelmets or using a tie-back curtain system. It can be difficult to choose curtains with so many influencing factors. To make curtain shopping more enjoyable and easy consider making your purchase from a reputable company with many years of industry experience. Your chosen retailer can offer you advice and customer assistance for your curtain purchases, ensuring you get the correct curtain for your home, the first time.
NB It is important that you get the sequence 100% correct before you make the marks and the holes, should you realise that you want to change the roses around after the holes have been made you run the risk of having gaping holes in your curtain which could look rather messy. The next step will be to measure the top width of the window frame and then cut the dowel or curtain wire in order to fit (using either a pliers if it is wire or a hand saw if you are cutting the dowel). If you are using curtain wire go to the top of the window frame and attach one screw eye on the left and right hand side of the frame. Ready made organza curtains should have tabs at the top, attach hooks to both ends of the curtain wire and then thread the wire through the tabs of both curtains and attach the wire to the screw eyes on the window frame. If you are using a wooden dowel use cup hooks and not screw eyes for the dowel to rest on. Thread the dowel through the tabs and place on cup hooks.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius. Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30".
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.