Tracking could be classified as ceiling mounted cubicle track and suspended cubicle track. The ceiling mounted cubicle tracking systems would be made out of aluminum and could be used effectively for covering the beds of patients, separating shower areas in the bathrooms, or in any other places where personal privacy is needed. In places where the ceilings are very high or other obstructions prevent the mounting of curtain track in the ceiling directly, suspended cubicle tracking system is utilized. In the suspended tracking systems, the curtain track is suspended by an aluminum tube that is fixed to the ceiling and the track with plastic flanges. The carriers normally contain a nylon axle, two free-rolling nylon wheels, a nylon swivel stern that is designed to be tangle-free and steel hooks that are chrome-plated. Nylon materials are used as curtain carriers since they would not easily break or rust and are highly durable. However, the curtain carrier glide could also be made with a nylon swivel, one-piece nylon spool, and steel hook of chrome plating. Another type of curtain carrier is the breakaway carrier, comprised of nylon wheels, hook, and body. The tracking for curtains would vary from one location to another to suit the type of construction of the room.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius. Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30".
I Disagree, I say you should always start from the middle and work outwards towards the ends. The reason I advise you do it this way is because if you have too many gliders on your track or too many rings on your rod you can easily remove them from the ends of your track or rod. Where if you start from the outside in to the middle the surplus gliders or rings are locked in the middle of your track or rod. Meaning you have to unhang your curtains to remove them. Not much more now and you will have the basics on how to hang curtains. Why do some advise to start from the middle? The reason is on some tracks and rods, but mostly the corded kind. They have what are called overlap arms. These are short arms made of metal or platic with holes in for the last couple of curtain hooks on each leading edge of your pair of curtains (edges that meet at center of your window).
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.