Theses overlap arms allow one curtain to pass and overlap the other curtain by 2 or 3 inches. Thus giving you total privacy. So whats the big problem? So wheres the problem? the problem is that these arms are not very strong. This means when you start to hang a medium to heavy curtain. Especially without someone carrying the weight they sag and twist or break completely. Avoiding the problem! So how do we avoid that when hanging from the center of the track or rod and working outwards. Very simple really, if you need 2 hooks to go in the overlap arm then count in to the 3rd hook and hook this into the first real glider or ring. Leaving the 1st and 2nd curtain hooks to just hang in space. continue hanging your curtain working from the middle outwards. Thats how to hang curtains my way (the best way obviously "wink") Then once you have reached the ends of your track or rod (removing any surplus gliders or rings). You go back to the middle and hook in the last couple of curtain hooks into the overlap arms. So avoiding putting to much weight on them.
Tracking could be classified as ceiling mounted cubicle track and suspended cubicle track. The ceiling mounted cubicle tracking systems would be made out of aluminum and could be used effectively for covering the beds of patients, separating shower areas in the bathrooms, or in any other places where personal privacy is needed. In places where the ceilings are very high or other obstructions prevent the mounting of curtain track in the ceiling directly, suspended cubicle tracking system is utilized. In the suspended tracking systems, the curtain track is suspended by an aluminum tube that is fixed to the ceiling and the track with plastic flanges. The carriers normally contain a nylon axle, two free-rolling nylon wheels, a nylon swivel stern that is designed to be tangle-free and steel hooks that are chrome-plated. Nylon materials are used as curtain carriers since they would not easily break or rust and are highly durable. However, the curtain carrier glide could also be made with a nylon swivel, one-piece nylon spool, and steel hook of chrome plating. Another type of curtain carrier is the breakaway carrier, comprised of nylon wheels, hook, and body. The tracking for curtains would vary from one location to another to suit the type of construction of the room.
I Disagree, I say you should always start from the middle and work outwards towards the ends. The reason I advise you do it this way is because if you have too many gliders on your track or too many rings on your rod you can easily remove them from the ends of your track or rod. Where if you start from the outside in to the middle the surplus gliders or rings are locked in the middle of your track or rod. Meaning you have to unhang your curtains to remove them. Not much more now and you will have the basics on how to hang curtains. Why do some advise to start from the middle? The reason is on some tracks and rods, but mostly the corded kind. They have what are called overlap arms. These are short arms made of metal or platic with holes in for the last couple of curtain hooks on each leading edge of your pair of curtains (edges that meet at center of your window).
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.