Sibyla Rodrigue. Curtain. December 12th , 2017.
NB It is important that you get the sequence 100% correct before you make the marks and the holes, should you realise that you want to change the roses around after the holes have been made you run the risk of having gaping holes in your curtain which could look rather messy. The next step will be to measure the top width of the window frame and then cut the dowel or curtain wire in order to fit (using either a pliers if it is wire or a hand saw if you are cutting the dowel). If you are using curtain wire go to the top of the window frame and attach one screw eye on the left and right hand side of the frame. Ready made organza curtains should have tabs at the top, attach hooks to both ends of the curtain wire and then thread the wire through the tabs of both curtains and attach the wire to the screw eyes on the window frame. If you are using a wooden dowel use cup hooks and not screw eyes for the dowel to rest on. Thread the dowel through the tabs and place on cup hooks.
Theses overlap arms allow one curtain to pass and overlap the other curtain by 2 or 3 inches. Thus giving you total privacy. So whats the big problem? So wheres the problem? the problem is that these arms are not very strong. This means when you start to hang a medium to heavy curtain. Especially without someone carrying the weight they sag and twist or break completely. Avoiding the problem! So how do we avoid that when hanging from the center of the track or rod and working outwards. Very simple really, if you need 2 hooks to go in the overlap arm then count in to the 3rd hook and hook this into the first real glider or ring. Leaving the 1st and 2nd curtain hooks to just hang in space. continue hanging your curtain working from the middle outwards. Thats how to hang curtains my way (the best way obviously "wink") Then once you have reached the ends of your track or rod (removing any surplus gliders or rings). You go back to the middle and hook in the last couple of curtain hooks into the overlap arms. So avoiding putting to much weight on them.
Suspension tubing may be used with high ceilings or if existing obstructions prevent the curtain tracking from being mounted directly to the ceiling. Suspension tubing is available in 8 foot lengths and made with 7/8" O.D. hollow aluminum tubing. Suspension tubing can be attached directly to solid ceilings with a ceiling flange or via ceiling clips to a drop down/false ceiling. A screw insert is then placed in the bottom of the suspension tubing allowing the curtain tracking to be attached. Suspension tubing should be placed every six feet and the tracking ends can be attached to a wall with a nylon wall bracket. Anodized aluminum splicing clamps join multiple pieces of tracking to ensure proper alignment of the channels. This will allow the carriers/rollers to move freely from one piece of tracking to the next. Clean and smooth the ends of each piece of track before assembly; burrs may cause the carriers/rollers to hang up.
Curtains and curtain tracks or poles can be bent to fit a bay window Although some vertical blinds can be bent to the shape of a bay window, a vertical blind will take away the lovely effect and leave the room looking more like an office. A curtain track or curtain pole can be made to measure and bent to suit a bay window and the curtains will once again add elegance and style. Curtain tracks are also more flexible and can be made to fit a wider range of bay windows. Increased fitting flexibility Some of todays more modern windows and patio doors open inwards leaving little space to fix. With curtain tracks that can be as small as 5mm and some that can even be recess fixed into a ceiling, this will leave plenty of room for a window or door to open inwards.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling. Various specialty brackets allow for multiple ceiling track configurations. T-brackets connect a perpendicular section of tracking part way along an existing section of tracking. Cross brackets subdivide a room into 4 or more separate sections depending on the size of your room and the size of your tracking layout.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.