Curtains enjoy a place of honor whether it is a beautiful house, elegant mansion, ritzy restaurant or opulent hotel or a shop/beauty parlor. You name it and they are there. You will find use of curtains right from the olden times. Whether they are there can be due to different reasons. It can either be for functional purposes such as to afford protection from elements such as wind, red - hot sun or winter snows or purely as an outlet for mans creative spirits and décor. Whatever may be the reason curtains and their rods have been a part of human existence and will continue to be there for ages to come. We can broadly categorize curtains in two ways - by style and by fabric. While curtains are used at different places for different purposes, they tend to be categorized by the use they are going to be put into. You can use only a plastic or chemical quoted plastic curtain in a hospital or shower stall where it come into contact with water frequently. Likewise, you cannot use stylish or fancy curtains in your bed room or drawing room.
Theses overlap arms allow one curtain to pass and overlap the other curtain by 2 or 3 inches. Thus giving you total privacy. So whats the big problem? So wheres the problem? the problem is that these arms are not very strong. This means when you start to hang a medium to heavy curtain. Especially without someone carrying the weight they sag and twist or break completely. Avoiding the problem! So how do we avoid that when hanging from the center of the track or rod and working outwards. Very simple really, if you need 2 hooks to go in the overlap arm then count in to the 3rd hook and hook this into the first real glider or ring. Leaving the 1st and 2nd curtain hooks to just hang in space. continue hanging your curtain working from the middle outwards. Thats how to hang curtains my way (the best way obviously "wink") Then once you have reached the ends of your track or rod (removing any surplus gliders or rings). You go back to the middle and hook in the last couple of curtain hooks into the overlap arms. So avoiding putting to much weight on them.
NB It is important that you get the sequence 100% correct before you make the marks and the holes, should you realise that you want to change the roses around after the holes have been made you run the risk of having gaping holes in your curtain which could look rather messy. The next step will be to measure the top width of the window frame and then cut the dowel or curtain wire in order to fit (using either a pliers if it is wire or a hand saw if you are cutting the dowel). If you are using curtain wire go to the top of the window frame and attach one screw eye on the left and right hand side of the frame. Ready made organza curtains should have tabs at the top, attach hooks to both ends of the curtain wire and then thread the wire through the tabs of both curtains and attach the wire to the screw eyes on the window frame. If you are using a wooden dowel use cup hooks and not screw eyes for the dowel to rest on. Thread the dowel through the tabs and place on cup hooks.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.