You just have to learn how to hang curtains and dress them properly. prepping your pencil pleat curtains prior to hanging: Standard pencil pleat curtains to start you will need to gather the tape on the top of your curtains. You do this by pulling out the 3 cords in the back of the curtain tape. To start pull the cords out of both ends of the curtain tape and tie them together in a firm knot. There are 2 reasons for this 1. It stops you pulling the cords completely out of the tape (not a good start when learning how to hang curtains). 2. It keeps the cords together on the end that you pull the cords out to gather your curtain. Then continue to pull the cords out.
Curtains can be controlled remotely As mentioned above, electric curtain tracks can be fitted which allow you to control your curtains from the comfort of your armchair. Although it may seem like the height of laziness, there is a practical aspect to electric curtain tracks. When on holiday, people typically use automated light-switching devices but have to leave curtains or blinds half open. Electric curtains can be set to open and close at set times each day, giving the impression that someone is home. Alternatively a light sensor can be added to open and close the curtains in conjunction with the daylight hours. Curtains are easy to hang Want to change your curtains? Simply unhook them from your curtain pole, attach the hooks to your new curtains and away you go. Replacing vertical blinds can involve unhooking each blind from the next, unclipping each one carefully (the plastic is easy to snap), and then going through the whole rigmarole in reverse to put them back up. Other blinds must be removed all in one, making it easy to damage them as they are taken down or put back up. Reliable and cost effective With so many working parts or fiddly clips, blinds tend to be less reliable than curtains on a track or a pole. Combining curtains with a good, reliable curtain track or pole can be a more cost effective option; especially as curtain prices have been greatly reduced since the introduction of ready-made and express curtain making services. And if your requirements change, you can simply hang new curtains on your existing track or pole.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius. Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30".
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.