Once a style is determined, calculate the height and length of the curtain necessary to cover the intended space. The length should generally be 15% wider than the length to be covered. For a more ruffled look, add 30% to the length. For example: you require 220" of length to cover your space. You would then multiply 220" x .15 and come up with 33"; add the 33" to the original 220" and you will need to order a length of 253". To establish the height of the curtain there are three measurements needed to be determined. Begin by measuring the height from the floor to the ceiling. For this example lets start with a 10 foot ceiling which is 120 inches in height. Next measure the height of the carrier and curtain tracking; this is usually 3"-4" combined. The third measurement to determine is the open space wanted below the bottom of the curtain; 12"-18" is typical. Take the ceiling height of 120" and subtract 12" for bottom clearance and 4" for tracking and carriers and this leaves a final curtain height of 104". Typical curtain sizes range from 72" to 234" wide and 84" to 108" long. Cubicle curtains can be made to order and customized in most cases. Healthcare facilities often have building and fire codes which must be met; check with an administrator before proceeding.
The curtain fabrics are supplied by nearly all the manufacturers in different colors and patterns so that they match the interior of the rooms where the cubicle curtains are used. The specifications of the fabrics and their compliance to fire retardant standards of the state government should be studied and confirmed before placing orders for cubicle curtains. Curtain Track and Curtain Carriers The cubicle curtain tracking is done with a curtain track that had been specially designed and bent to meet the specifications and requirements at the place of installation. The curtain tracking systems are normally powder coated and the most common powder coating color is white, so that the curtain carriers blend with the ceiling. Moreover, the curtain track is generally provided a fair amount of lubrication by the application of a Teflon coating, so that the cubicle curtain fabric could be easily operated, if opening or closing of the enclosure is required. The curtain tracking system is also provided with gliding carriers so that the above work is made much easier.
Curtains and curtain tracks or poles can be bent to fit a bay window Although some vertical blinds can be bent to the shape of a bay window, a vertical blind will take away the lovely effect and leave the room looking more like an office. A curtain track or curtain pole can be made to measure and bent to suit a bay window and the curtains will once again add elegance and style. Curtain tracks are also more flexible and can be made to fit a wider range of bay windows. Increased fitting flexibility Some of todays more modern windows and patio doors open inwards leaving little space to fix. With curtain tracks that can be as small as 5mm and some that can even be recess fixed into a ceiling, this will leave plenty of room for a window or door to open inwards.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.