Repeat the process on the top right hand side of the same curtain, now find the centre between the two roses and to create a bit of interest attach the middle rose slightly lower than the rose on the left and the right. Place the fourth rose underneath the third middle rose but slightly lower. Place the fifth rose to the left side of the fourth one but slightly lower (should be in line with the first rose attached at the top left side of the curtain), now the attach the sixth rose to the right of the fourth rose but slightly lower (should be in line with the second rose attached at the top right side of the curtain. Your sequence of six is now complete and I personally find that this pattern is most pleasing to the eye, you could of course embellish the whole curtain, it really depends on the look which you are trying to achieve.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius. Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30".
Medium weight curtains use nylon hooks, stronger than plastic. They will flex without breaking. Heavy curtains use metal nickel hooks, they are bit fiddly to handle they all stick together the box. Just like the Chinese puzzles I had as a child. Curtain hooks for bucram headed curtains You will need what are called "pin hooks" simply because they have a sharp pin which pierces through the fabric and bucram on the back of the curtain header. This kind of heading makes for the best looking curtains. As always the best all ways costs that bit more.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.