The curtain fabrics are supplied by nearly all the manufacturers in different colors and patterns so that they match the interior of the rooms where the cubicle curtains are used. The specifications of the fabrics and their compliance to fire retardant standards of the state government should be studied and confirmed before placing orders for cubicle curtains. Curtain Track and Curtain Carriers The cubicle curtain tracking is done with a curtain track that had been specially designed and bent to meet the specifications and requirements at the place of installation. The curtain tracking systems are normally powder coated and the most common powder coating color is white, so that the curtain carriers blend with the ceiling. Moreover, the curtain track is generally provided a fair amount of lubrication by the application of a Teflon coating, so that the cubicle curtain fabric could be easily operated, if opening or closing of the enclosure is required. The curtain tracking system is also provided with gliding carriers so that the above work is made much easier.
Simple tip on gathering your curtains. Take one set of knotted cords and hook over a door handle or some other fixed object. Then use one hand to hold the curtain tape and with the other hand start to pull the tape away from the door handle. You will see the heading on your curtain start to pleat. How wide do you curtains need to be? Next check what half the width of your track or rod measures. Lets say your track is 100 inches long. You half this to 50 inches, then add on 2 inches to allow your curtains to comfortably meet in the middle when hanging.
Theses overlap arms allow one curtain to pass and overlap the other curtain by 2 or 3 inches. Thus giving you total privacy. So whats the big problem? So wheres the problem? the problem is that these arms are not very strong. This means when you start to hang a medium to heavy curtain. Especially without someone carrying the weight they sag and twist or break completely. Avoiding the problem! So how do we avoid that when hanging from the center of the track or rod and working outwards. Very simple really, if you need 2 hooks to go in the overlap arm then count in to the 3rd hook and hook this into the first real glider or ring. Leaving the 1st and 2nd curtain hooks to just hang in space. continue hanging your curtain working from the middle outwards. Thats how to hang curtains my way (the best way obviously "wink") Then once you have reached the ends of your track or rod (removing any surplus gliders or rings). You go back to the middle and hook in the last couple of curtain hooks into the overlap arms. So avoiding putting to much weight on them.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.