Once the curtain has been hung it is ready to be embellished. Start with the left or right curtain first and open it up so that it is spread out wide across the window, this way so you can see exactly where you have made the marks and where you are going to place the roses. For this purpose I am going to attach six roses to each curtain using a sequence of three. Remove the plastic backing from the rose by giving it a good pull; your rose will now be in two parts, (the backing and also the rose and stem). Start at the top left hand corner of the curtain, using the awl push a hole through the organza where you have made your first mark, NB its easier and is likely to make a cleaner hole if you hold the fabric on either side of the mark that you made whilst pushing the awl through. Once the hole has been made (ensure that it is big enough for the stem to go through) push the stem of the rose through the hole and secure the rose by pushing the plastic backing back onto the stem which will now be facing the back of the curtain, push it up as far as it will go, this will ensure that the rose wont fall off when its being laundered.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling. Various specialty brackets allow for multiple ceiling track configurations. T-brackets connect a perpendicular section of tracking part way along an existing section of tracking. Cross brackets subdivide a room into 4 or more separate sections depending on the size of your room and the size of your tracking layout.
Whether you are cordoning off sections of a tattoo parlor, healthcare facility, photography studio, laboratory, class room or a home, curtain tracking has become an easily accessible tool. Selection and installation of curtains and curtain tracking is not rocket science, but here are some pointers to smooth the process. The first step is choosing a curtain. You need to ask yourself what you want your curtain to do. If it is needed it to block light, then a blackout fabric should be chosen. If it must meet state and federal commercial fire codes, then mesh top curtains are necessary to allow sprinkler systems to adequately protect their environment. Quality cubicle and hospital curtains are made with inherently fire retardant materials that are durable, safe, and last throughout the lifetime of the cubicle curtain. There are many colors and styles of fabrics to choose from; including solid colors, striped, textured, patterned and more.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.