Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius. Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30".
Shower curtain ideas for a new bathroom treatment Its exciting to be able to research online with such a variety of fabric shower curtains. The manufacturer of shower curtains have gone to the extreme to offer you any style or theme you may want from antique, country, with water themes or beautiful contemporary shower curtain designs. Fabric shower curtains will give you a more elegant and sophisticated look to a nice informal with a little more fun added to it. The designer shower curtain has a unique fashion statement and is a very personal choice. All of these textile shower curtains might be a little bit more in price than some of the other curtains but the quality and durability that you will get will be well worth the investment.
Suspension tubing may be used with high ceilings or if existing obstructions prevent the curtain tracking from being mounted directly to the ceiling. Suspension tubing is available in 8 foot lengths and made with 7/8" O.D. hollow aluminum tubing. Suspension tubing can be attached directly to solid ceilings with a ceiling flange or via ceiling clips to a drop down/false ceiling. A screw insert is then placed in the bottom of the suspension tubing allowing the curtain tracking to be attached. Suspension tubing should be placed every six feet and the tracking ends can be attached to a wall with a nylon wall bracket. Anodized aluminum splicing clamps join multiple pieces of tracking to ensure proper alignment of the channels. This will allow the carriers/rollers to move freely from one piece of tracking to the next. Clean and smooth the ends of each piece of track before assembly; burrs may cause the carriers/rollers to hang up.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does BengalsJerseys claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.